Requirements to “lighten up” energy use and costs through fenestration, parking lot lighting, and other proposed measures are being recommended for Standard 90.1. ANSI/ASHRAE/IESNA Standard 90.1-2007, Energy Standard for Buildings Except Low-Rise Residential Buildings, provides minimum requirements for the energy efficient design of buildings except low-rise residential buildings. Currently, 15 proposed addenda to the standard are open for public review.
“As the industry continues to call for buildings and systems that use less energy, the Standard 90.1 committee is striving to find ways to reduce energy uses and costs,” Mick Schwedler, chair of the Standard 90.1 committee, said. “The proposed changes not only reduce energy use but move the standard closer to the workplan goal of a 2010 standard with 30 percent energy cost savings compared to the 2004 standards.”
Among the proposed addenda out for public comment is addendum cd, which would require active exterior control rather than just require the control capability; add bi-level control for general all night applications (such as parking lots to reduce lighting when not needed); and add control for façade and landscaping lighting not needed after midnight.
Eric Richman, chair of the standard’s lighting subcommittee, noted that studies from the California Lighting Technology Center at the University of California at Davis found that control strategies reduce lighting energy use by significant amounts during night time hours. A study by Polytechnic State University showed that parking lot lighting operates in a low mode 68% of the time.
Additional information from a study by Navigant Consulting shows that parking lots account for 22 Twh out of a total 57 Twh used for outdoor lighting annually nationwide. While this estimate includes all lit parking areas, the potential for energy savings in parking areas that are directly associated with specific building projects are significant and should be supported by the standard.
A second public review of proposed addendum, bn, would reduce solar loads by orienting the fenestration in more appropriate directions. Changed in response to comments during the first public review, this approach gives flexibility to building design teams to work with siting and fenestration and orientation as well as fenestration area to comply with the requirement.
Proposed addendum bb updates building envelope requirements for opaque elements, such as walls and rooms, and fenestration (windows and skylights). A number of changes were made in response to public comments during the first public review.
The proposed addenda to ASHRAE/IESNA Standard 90.1 are available for comment only during their public review period. To read the addenda or to comment, visit this link.
You might like:
- Four Types Of Concrete Damage And How To Address Them
- Rise Of IoT Prompts Facility Professionals To Invest In Analytics
- Facility Management Critical To Infection Control
- 4 Ways To Avoid LED Lighting Failure
- Question Of The Week: What Best Practice Boosts Your Bottom Line?
- FM Alert: OSHA Offering $4.6M In Safety And Health Training Grants
- Friday Funny: The Dirty Truth About Public Bathrooms
- Best Practices For Data Center Management
- Technology, Aging Facilities Impacting Education Facility Budgets
- Applying Lean Principles To Facility Cleaning Programs
- Look, Listen, And Learn To Find Leaks
- New Vikings Football Stadium First In U.S. With Transparent Roof
- Energy Upgrades And Renovations: What To Know About Windows
- Preventive Maintenance, Proactive Facility Management
- U.S. Employers Suffer Largest Talent Shortage In Skilled Trades