Parking Garage LED Luminaire by EPCO

The Parking Garage LED Luminaire by Engineered Products Company (EPCO) is for new construction and renovation projects. Solid state, gasketed, and vapor-tight, it provides energy efficiency, energy savings, and improved thermal dissipation for indoor and outdoor operation. The LED is also NEMA 4X, IP65, IP66, and IP67 rated dust and moisture resistant and suitable for use in wet locations where high-power pressure wash-down is required.

garage LEDThe Parking Garage LED Luminaire is available in 4′ lengths only. It features two rows of LEDs and reflectors. These magnify lumen output intensity to distribute the light outward as an enhanced controlled beam. As a result, the product consumes less than half the wattage of a 4′ luminaire using two 32 watt T8 fluorescent lamps.

The Parking Garage LED is installation ready. It is designed for even light distribution and improved thermal dissipation. In addition, a frosted polycarbonate diffuser mitigates any glare to the finished floor.

The Parking Garage LED has an auto-compensate feature to ensure fail-safe operation in the event of multiple LED chip failures. Mounting hardware allows the mounting brackets to be pre-installed to a vertical or horizontal surface without drilling into the luminaire housing.

The Parking Garage LED Luminaire delivers a CRI of 82+ with a minimum life expectancy of 50,000 hours. Input voltage is 120V to 277V at 60 Hz; power factor is .9 or higher; and total harmonic distortion is less than 20%. The LED driver efficiency is 89% (typical) at 120VAC (full load) and 90% (typical) at 220VAC (full load). Ambient operating temperature is -40°F to 122°F and a 0°F to 113°F with battery backup option.

The Parking Garage LED is Design Lights Consortium (DLC) approved, ETL listed, and RoHS compliant. It also meets UL 1598 standards and 2014 National Electrical Code requirements: Articles 410.10(A), 410.104(A), 410.130(G)(1), 547.5(C)(1) and (2), and 547.8(A) and (B).