Content related to ‘environment’
The IFMA Foundation and ASBE have produced a free white paper titled A Comprehensive Guide to Water Conservation: The Bottom Line Impacts, Challenges and Rewards.
The U.S. EPA has recognized four WaterSense partners for exceptional efforts in promoting water efficiency and WaterSense labeled products during 2009.
The DEFINITY PAR38 LED lightbulb from Lighting Science Group is the industry’s first LED bulb to receive the ENERGY STAR label. The bulb is 80% more efficient than the 75 watt incandescent halogen bulb it replaces, has approximately 50% more lumens (light output) than competing products, and is fully dimmable. The DEFINITY PAR38 bulb is the first in a line of Lighting Science Group products going through the ENERGY STAR approval process; the line includes A19, PAR30, PAR20, MR16, and G25 bulb types. To ensure both performance and reliability, the cULus-listed DEFINITY LED line was tested under the ENERGY STAR Eligibility Criteria, Version 1.1 process by an independent laboratory approved by the U.S. Department of Energy’s CALiPER program. To receive the ENERGY STAR label for an integral LED lamp, the DEFINITY PAR38 bulb was tested at a third party laboratory under the LM79 standard for overall efficiency, color temperature, color rendering, color spatial uniformity, and light emission pattern. Additional testing required for ENERGY STAR approval included: rapid cycle thermal stress testing, in-situ temperature testing, both lumen maintenance and color maintenance testing, and an operational test for 3,000 hours at elevated ambient temperature. It comes with a five-year limited warranty.
The company is the first commercial-sector sponsor of the Recycling Organizations of North America.
An recent expansion to its Kirkcaldy, Scotland facility aims to reduce lead times for its MCT product significantly.
Engineering practices such as building information modeling (BIM), geothermal, and combined cooling, heating, and power were highlighted in the winning entries in the 2010 ASHRAE Student Design Competition.
TD Bank is participating in a program to ensure a portion of paper used at its facilities is recycled and reused.
NSF International and the National School Supply and Equipment Association (NSSEA) are working on this tool to certify health, safety, and environmental aspects of products and equipment for educational settings.
GAF’s Cobra® Ridge Vent plant, located in the northern Atlanta suburb of Cumming, GA, is a bright, highly automated, state-of-the-art facility — the type one might associate more with the production of silicon wafers than roofing ventilation products. The company and the team that runs this facility take its environmental role seriously. This includes waste management, and after a three-year effort, the plant recently announced the achievement of Zero Manufacturing Waste ahead of schedule. This GAF plant makes five different models of ridge vent for different applications and regions and has produced more than 20 million vents without a customer complaint, while practicing Lean Manufacturing techniques extensively. For those new to the concept of Lean Manufacturing (often referred to merely as “Lean”), this is a process and approach that convenes process improvement teams (sometimes called Kaizen teams) to make a continuous series of small improvements to an operation. When properly practiced, it can result in a highly efficient, flexible manufacturing operation that runs at very high yield rates. Lean is built around the concept of “value streams”, which follow the process of value creation from beginning to end. As an example, the value stream could be the process of ordering polypropylene, all the way through to injection-molding a ridge vent and shipping it. Or it could be the process of tearing off and installing a roofing system. The concept can be applied equally in offices, job sites, or production floors — everything along the way that doesn’t add value to the customer should be considered and improved. Most processes have some form of waste — unnecessary counting steps, waiting for tools and equipment, work in progress, product changeovers, or raw materials that don’t become part of the finished product. These are all targets for elimination by Lean techniques. What’s different about Lean is the focus on value streams as opposed to departments. The Lean approach focuses on the whole process, rather than a single step. Anything that hangs up the flow of production needs to be modified, removed, or streamlined, and once you remove one obstruction, you keep heading downstream to find and remove the next — making that entire stream flow smoothly is your team’s responsibility, not another department’s. By following these streams of value creation through the plant and process, and by asking those that actually run it to be involved in its development and improvement, the Lean approach can be very effective. And even though it sounds like a manufacturing-specific approach, Lean, at its core, is really… …Read More…
This carpet collection is Cradle to Cradle certified and can help to earn LEED points.