NEW PRODUCT FLASH: CLED Series Exit Signs | Facility Executive - Creating Intelligent Buildings

The CLED Series provides self-diagnostic electronics as standard equipment.


https://facilityexecutive.com/2009/07/new-product-flash-cled-series-exit-signs/
The CLED Series provides self-diagnostic electronics as standard equipment.
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

NEW PRODUCT FLASH: CLED Series Exit Signs

NEW PRODUCT FLASH: CLED Series Exit Signs | Facility Executive - Creating Intelligent Buildings

High-Lites' CLED Series signs come in five decorator finishes and with red or green lettering.
High-Lites CLED Series signs come in five decorator finishes and with red or green lettering.

High-Lites has recently introduced its new CLED Series of cast aluminum LED exit signs. The Series was redesigned to provide a cleaner, more contemporrary look and offers an expanded number of option and accessory items.

A notable feature of the CLED Series is that it provides self-diagnostic electronics as standard equipment. This self-diagnostic circuitry provides continuous monitoring of operational parameters, visual product readiness status, and automatic monthly testing cycles. CLED’s self-diagnostic electronics also continuously monitor the exit’s AC input voltage, charger voltage and current, transfer circuit, battery voltage, and exit sign’s LED light strip for proper operation. Should any monitored value fall outside of predetermined limits, the unit automatically displays a visual indication of the area and type of malfunction using the unit’s bi-color LED display.

The self testing electronics can detect and visually indicate the following fault conditions:

  • AC Input Over Voltage
  • AC Input Under Voltage
  • Charger Circuit Malfunction
  • Battery Disconnect
  • Battery Over/Under Voltage
  • Transfer Circuit Malfunction
  • LED Lamp Strip Failure

Automatic testing cycles include a one-minute self-test every 30 days and a 30-minute self-test on the sixth and 12th month on the CLED exit. User initiated one-minute or 90-minute self test cycles can be performed at any time using the CLED exit’s integral test switch.

All CLED exits also provide an infrared testing sensor, which will allow a one-minute, 30-minute, or 90-minute self-test cycle at any time using an infrared remote testing device (IRT) sold separately. The IRT has a line of sight range of up to 40 feet from the installed exit, providing ease of testing for exits installed in difficult locations.

Suggested Links:

You Might Like:

SHARE
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Previous articleWEIRD WEDNESDAY: What's Wrong With This Picture?
Next articleWorld FM Day Reminder: August 28, 2009

LEAVE A REPLY