Push plates are actuator products for door control release

106 Series Push Plates are upscale actuator products for use where building codes require a door control release tested for 1,000,000 cycles.


https://facilityexecutive.com/2018/10/deltrexusa-106-series-push-plates/
106 Series Push Plates are upscale actuator products for use where building codes require a door control release tested for 1,000,000 cycles.
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

DeltrexUSA 106 Series Push Plates

Tested for 1,000,000 cycles, these door control release products are available with a number of options

Push plates are actuator products for door control release

106 Series Push Plates from DeltrexUSA are upscale actuator products for use where building codes require a door control release. These large push plates are mounted on a back plate with smooth beveled edges and joined from the back with concealed screws. Marine type aluminum is standard, while also available in stainless steel and architectural bronze where better hygiene is required. Narrow recessed models specifically designed for storefront frames can be ordered, and both color and deep-cut engraving can be customized to specification.push plates

The S106 Push Plate Switches consist of a narrow security push plate (4″ x 1.5″) on a narrow back plate (4.5″x 1.75″). The D106 Series Push Plate Switch consist of a two-gang push plate (4.5″ x 4.625″) on a two-gang box back plate (4″ x 4″). The T106 Series Push Plate Switch consist of narrow push plate (4″ x 1.5″) on a one-gang box back plate (3″ x 4.5″). The F106 Series Push Plate Switch consist of a one-gang push plate (2.5″ x 4″) on a one-gang box back plate (3″ x 4.5). The L106 Series Push Plate Switch consist of a long narrow security push plate (5.875″ x 1.5″) on a long narrow back plate (6.375″ x 1.75″).

Tested for 1,000,000 cycles, all 106 Series Push Plates are manufactured with rust resistant 1/4″ 5052 marine-type aluminum and non-binding internal stainless steel screws. The contact rating is 6 Amps @ 125VAC/28VDC and a SPDT momentary switch is standard with double pull double throw momentary (DPDT), pneumatic time-delay switch (PNUM), wireless (WILS), and dual timer (TIMR) options.

106 Series Push Plates can be non-engraved (E00); engraved with the handicap symbol, words such as Exit (E01), Push to Exit (E02), Push to Open (E03), Emergency (E04), Push to Unlock Gate (E09), Push to Sound Alarm (E11); or custom engraved (ECE). Engraving is available in Spanish, Japanese, French, Arabic, Portuguese, and Chinese and in red, black, gold, white, or custom colored. A clear satin anodized aluminum finish is standard with options that include Sandblast, Red, Dark Brown, Off White, and custom finishes.

Suggested Links:

You Might Like:

LEAVE A REPLY