Wall-mountable surge protectors with audible alarm & LED indicator

Deflector Series surge protectors feature an audible alarm, flashing LED indicator, and remote notification.


https://facilityexecutive.com/2018/10/modular-ditek-surge-protectors/
Deflector Series surge protectors feature an audible alarm, flashing LED indicator, and remote notification.
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Modular DITEK Surge Protectors

Deflector Series sets industry standard for fire protection with audio alert, LED indicator, and UL approval

Wall-mountable surge protectors with audible alarm & LED indicator

The Deflector Series from DITEK is a line of Surge Protective Devices. With an audible alarm, flashing LED indicator, and remote notification capability, the surge protectors let users know in three ways when they require attention. Rapid-replacement modules make it possible to have the units up and running again in only a few seconds.surge protectors

The Deflector is conveniently wall-mountable, with no additional enclosure required, allowing surge protectors to be placed in close proximity to core systems or devices that warrant the highest levels of protection.

“The Deflector Series makes it even easier to keep fire alarm panels—or any mission-critical 120-volt device not exceeding 20 amps—safe from damage or destruction from power surges,” said Jason Klein, National Sales Manager, DITEK. “Up until now, it’s been a problem for users who may not see a visible out-of-service indicator until it’s too late and their equipment has been damaged by a power surge. The Deflector solves that problem with a unique audible alarm that can’t be ignored. In fact, the Deflector can easily protect every product on the GSX show floor. We’d all know immediately if a lightning strike or power surge put it out of commission, and it would take only three seconds to pop in a new module and have it working again.”

The first product in the new series, the DTK-DF120S1 Deflector Series Surge Protector is a 120V dedicated circuit protection device designed to minimize damage from AC supply voltage spikes by isolating incoming surges that originate from lightning strikes and other sources. The device is simple for a licensed electrician to hardwire into a circuit, with no enclosure or rack required.

When the Deflector does its job by absorbing a power surge and stops functioning, the unit sounds a loud audible alarm and an LED flashes, indicating that the module needs to be replaced. Intelligent notification is also available via dry contacts, which can be connected to alarm panels to alert central station monitoring that the module needs replacing.

“With the Deflector Series, you’ll always know when the surge protection on your critical devices and systems requires immediate attention. When it goes, you’ll hear it and see it, and it’s a true rapid-replacement for the module,” said Klein. “Whether it’s a fire alarm panel or a whole rack of servers, our new Deflector Series will best protect every device powered by 120 volts.”

The Deflector Series is UL1449 listed as a Surge Protective Device (SPD), as well as UL1283 listed for EMI/RFI noise filtering.

Suggested Links:

You Might Like:

  • Smoke Detection & Fire Panel IntegrationHoneywell's VESDA advanced smoke detection technology can now integrate with some of the most widely used fire panels in commercial buildings without the need for additional hardware or wiring.
  • ANSUL Acoustic Nozzle Receives UL VerificationJohnson Controls recently received UL Verification for its ANSUL Acoustic Nozzle, making it the first fire protection product to earn a marketing claim verification for performance.
  • HID Trusted Tag Services for IoTRAEL Automatic Sprinkler Company and integrator Automated Decision have deployed HID Trusted Tag Services at one of Manhattan’s most iconic skyscrapers.

LEAVE A REPLY