The modular “SEAMLESS” S700 LED display fixture from JESCO Lighting Group provides uninterrupted light output in an ultra-slim design coupled with inter-linkability that also allows for left/right or inside/out lit cornering. It is suitable for showroom shelves and product displays in retail stores and at office workstations; for museums, galleries, and antique stores; for store-fixture shelving and point-of-purchase displays; integrated into furniture, bedroom headboards, and decorative trims in offices and hotels; and in bookcases and trophy cabinets.
The “SEAMLESS” S700 is available in six standard lengths: 4″, 8″, 12″, 24″, and 48″. Each length is easily inter-connectable and, when lit, delivers an even illuminated line of light without dead spots while the connection points are imperceptible and “seamless”.
The “SEAMLESS” S700 offers inter-connectable lit corners that provide for a left or a right turn as well as inside or outside lit connectors allowing the fixture to turn on either a horizontal or a vertical plane. This allows the displayed item to be surrounded from the top or the bottom of the shelf as well as from the side. Besides the L-type connectors, lit X- and T-type connectors can also be specified.
The refined “SEAMLESS” S700 measures 7/16″ W x 1/2″ H with a sleek aluminum frame and white opal lens. Mounting is achieved by using the embedded magnets for metal surfaces. Snap-in, fixed mounting clips (provided) and 45° mounting clips are also available for non-metallic surfaces. The display fixture may also be mounted onto non-metallic surfaces with optional metal tabs.
The 24V “SEAMLESS” S700 Series incorporates 63 LEDs per foot for a low-profile, high light output fixture with uniform, tight beam patterns—eliminating typical light “dots”. The three-step MacAdam LEDs are standard in 90+ CRI with white-light color temperatures of 2700K, 3000K, 3500K, and 4000K. On-board constant current IC components ensure that every LED receives the same specific current providing consistent levels of light output and color, with no voltage drop, and controlling any heat from the beginning to the end of the run. Full Spectrum LEDs and higher lumen output options are also available upon request.
Connectable input power cables are offered for plug are play or hardwire applications and are available in 12″ and 60″ lengths. Connecting cables used between two fixtures are also available in 6″, 12″, and 24″ lengths. End caps are provided with each display fixture. An optional in-line controller may be snapped in anywhere in a run for on/off control or memory touch dimming.
The “SEAMLESS” S700 also features a Lit Extender Connector with bottom and side feeds. This allows for two separately powered runs to be linked seamlessly for an extended uninterrupted run.