Tango1B from Altronix, a provider of power and data transmission products for the professional security industry, is a PoE Driven Power Supply / Charger with Lithium Iron Phosphate Battery Backup. This power solution significantly reduces the overall costs to deploy access control and security devices by eliminating the need for a licensed electrician. 12VDC or 24VDC devices can be powered simultaneously via 802.3bt PoE input.
“Our new Tango series further capitalizes on the inherent benefits of utilizing PoE to efficiently power access control and further reduce the overhead associated with conventional access control deployment,” said Alan Forman, President, Altronix Corporation. “With Tango, a technician can have an access or security system cost-effectively powered in seconds flat.”
Tango1B is powered by any 802.3bt 4PPoE power source (e.g., Altronix NetWay BT Series Midspan/Injectors). This Voltage Regulator converts an IEEE802.3bt PoE input into a regulated 24VDC and/or 12VDC output up to 75 watts. It eliminates the need for a high voltage power supply inside of an enclosure. The Tango eight-pin connector allows for stacking with compatible Altronix sub-assemblies such as ACMS8 and PDS8 (access power controllers and distribution boards), saving valuable enclosure space by utilizing a single footprint. Tango1B is designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability.
Tango1B features short circuit and overload protection and offers the flexibility to power an entire eight-door access control system with 4PPoE. This includes powering the access control panels, locks, readers and ancillary devices, while providing a battery charging circuit with a single Cat5E or higher cable.
Tango1B is manufactured in the U.S. and backed by a lifetime warranty. This PoE driven power supply has an operating temperature of 32°F to 120°F and storage temperature of -4°F to 158°F (relative humidity 85% +/- 5%).